重庆派生克经贸发展有限公司

派生克牌射钉-DD

admin — Mon, 26 Mar 2012 06:50:36 +0000

Head Diameter: 10mm/.395 Shank Diameter: 4.5mm/.177

Accessory: flute

Model： DD27P10 27mm/ 1 DD32P10 32mm/ 1-1/4

DD37P10 37mm/ 1-1/2 DD42P10 42mm 1-5/8

DD47P10 47mm/ 1-7/8 DD52P10 52mm/ 2

DD57P10 57mm/ 2-1/4 DD62P10 62mm/ 2-1/2

DD72P10 72mm/ 3

派生克牌射钉-CR9

admin — Mon, 26 Mar 2012 06:20:52 +0000

Head Diameter: 9mm/.350, Shank Diameter: 3.7mm/.145

Accessory: plastic hat and 14mm diameter steel washer

Model: CR925 25mm/1 CR930 30mm/ 1-1/8 CR940 40mm/ 1-1/2 CR950 50mm/ 2

派生克牌射钉器-PT721

admin — Mon, 26 Mar 2012 05:59:00 +0000

Diameter of Piston Sleeve:8mm.Cartridge Used: S5(.22cal./5.5 x 16mm)

Fastener Used: YD,HYD,PD,PJ,PK,M6A,HM6A,13-62mm.

Tool Weight: 2kgs.Tool Length: 340mm.Qty/Ctn:450 x 320 x 500/5pcs 23kgs

派生克牌-瓦斯枪/射钉枪 PT100

admin — Fri, 23 Mar 2012 06:18:47 +0000

More than 40 drive pin /4 strips can be loaded in one time..All components /spare parts are available for order.

Necessary attachment goes with tool..Good for thin steel plate and hard concrete..Drive pins from 13 to 38mm, regardless knurling shank and step shank are available.

Gas fuels of long one for more 1000 shots and short one for more 500 shots are available..Qty/Ctn: 570 x 150 x 490/1pc Gross Weight: 9kgs

派生克牌-螺栓

admin — Fri, 23 Mar 2012 05:36:04 +0000

派生克牌-射钉/钉子 – QD

admin — Thu, 13 Oct 2011 18:50:38 +0000

详细参数：

派生克牌-射钉器-PT80

admin — Thu, 13 Oct 2011 18:35:51 +0000

Diameter of piston sleeve:12mm

Cartridge Used: S1J (.27cal./6.8×11mm)

Fastener Used: QD, HQD, M6, M8, M10 threaded studs, TB eyelet pins, 13-62mm

Weight:3.2Kg

Tool length:350mm

Qty/Ctn: 440×340×500/5Pcs PT80 Blue Color Diameter of piston

sleeve:12mmCartridge Used: S1J(.27cal./6.8×11mm)

Fastener Used: QD, HQD, M6, M8, M10 threaded studs, TB eyelet pins, 13-62mm

Weight:3.2Kg

Tool length:350mm

Qty/Ctn: 440×340×500/5Pcs