CHONGQING BRAVO PACIFIC INDUSTRIAL CORP.,LTD

.Power Adjustable System

.Diameter of Piston Sleeve:8mm

.Cartridge Used:  S₁(.27cal./6.8 x 11mm)

.Fastener Used:  YD,HYD,M8,HM8,KD35,13-62mm

.Tool Weight:  2.3kgs

.Tool Length:  340mm

Qty/Ctn:480 x 290 x 430/5pcs  25kgs

DRIVE PIN LENGTH 16-72MM

POWDER LOADS:6.8X11(.27cal)

one time inside 10pcs nails with cartridges

Features:

1. Quality. The spray gun is made of solid metal, with a non-slip rubber handle and a non-slip shield, explosion-proof barrel, safe and durable.
2. Small and Convenient. Light weight, small size, can be operated with one hand, equipped with a plastic box, easy to carry the machine and nails.
3. Double Silencer. Thicker steel silencer reduces noise and is safer, and the construction environment is more comfortable, and will not disturb your family or neighbors.
4. Easy To Use. Hold the muffler sleeve with your hand and compress it back several times to remove the residue for the next operation
5. Widely Using. Suitable for red brick walls, concrete walls, 8mm aluminum alloy wire ducts, and thick wooden boards. No large amount of dust, energy saving and environmentally friendly

6. Power control, 3 levels of adjustment, can be adjusted according to different construction requirements

Product Details:

Name: Mini Nail Fixer

Material: Alloy steel+Rubber

Noise reduction effect: Strong

Product features: Small and lightweight, single-person operation

Power adjustment: 3 gear can be adjusted

Scope of application: Monitoring installation, air conditioner internal unit, water pipeline, hanger installation, wiring duct installation, etc.

Size: 35 * 11cm

Packing included:

1 x Nailer
1 x Gloves
1 x Glasses
1 x Brush
1 x Accessories set
1 x Box

10pcs/ctn, 370x335x365mm,11.7kgs

Name: Ceiling tool

*Stainless steel shell, beautiful and durable

*Unique silencing design to minimize noise

*Unique processing technology, more durable

5PCS/CTN,630X260X530MM,28KGS

Cartridge Used : S1 ( .27 cal /6.8 X 11 mm)/S3 (.27 cal/ 6.8 X 18 mm )

Fastener Used :  YD, DNJ, TS1/4″, KD35

Tool Weight : 3.5 kgs

Tool Length : 375 mm

package : 1 sets in a plastic box, 5 sets in a carton.

packing size : 410 X 400 X 250 mm/5 pcs

• Cartridge Used : S1 (.27 cal./6.8 X 11 mm )/S3(.27 cal. / 6.8 X 18 mm)
• Fastener Used : YD, DNJ, TS1/4″, KD35
• Tool Weight : 6.5 kgs
• Tool Length : 380 mm

• Diameter of Piston Sleeve with silencer : 8 mm
• Cartridge Used : S5 ( .22 cal./5.5 X 16 mm)
• Fastener Used : YD, HYD, PD, PJ, PK, M6A, HM6A, 13-76 MM
• Tool Weight : 2.3 kgs
• Tool Length : 340 mm

• Diameter of Piston Sleeve : 8 mm
• Cartridge  Used :  S5 (.22 cal. /5.5 X 16 mm )
• Fastener Used :  YD, HYD, PD, PJ, PK, M6A, HM6A, 13-76 MM
• Tool Weight : 2.3 kgs
• Tool Length : 340 mm
• Package : 5 pcs in a carton,  Gross Weight : 23 kgs

Stainless steel case, beautiful and durable。

Unique sound-absorbing design to minimize noise。

Unique processing technology, more durable。

This product eliminates the high-altitude operation of the old process (without any safety hazards), and does not require the construction conditions of the old process power tool equipment and power equipment.